Logistics & Transportation
Port IoT: Connected Cargo and Equipment
Published by IOT New Jersey Research & Editorial Team

- Why the Port Is Investing Now
- Connected Cargo
- Connected Equipment
- Electrification Changes the Data Problem
- Maintenance: Keeping the Machines Moving
- What This Means for Shippers, Truckers, and Warehouses
- Security and Resilience
- A Composite Example: The Reefer That Did Not Get Plugged In
- Workforce, Safety, and Change
- Looking Ahead: What to Watch
- Questions to Ask Your Port and Carrier Partners
- Common Mistakes
A container terminal is a factory whose product is movement. Cranes lift boxes from ships, tractors carry them across the yard, gantry cranes stack and retrieve them, gates check trucks in and out, and refrigerated containers hum on power plugs while they wait. All of it runs against a clock set by vessel schedules and truck appointments. IoT enters the port from two directions: connected cargo, meaning the containers and what is in them, and connected equipment, meaning the machines that move them. This article looks at both, with attention to what is happening at the Port of New York and New Jersey in 2026. It is a companion to our earlier look at IoT in container logistics at Port Newark and Elizabeth, with a different focus: the hardware, the data it produces, and what it means for businesses that depend on the port.
Why the Port Is Investing Now
The port handled 4,427,159 TEUs in the first half of 2026, roughly flat against the prior year, followed by a June of 769,422 TEUs, up 11.9 percent, which the Port Authority linked to an earlier peak season tied to trade policy changes, according to World Cargo News. Terminals have to handle that kind of swing without adding hours or space. In August 2026, APM Terminals Elizabeth announced a purchase of 96 electric terminal tractors from Orange EV and 34 electric rubber-tired gantry cranes from Konecranes, according to the company's release. Electrek reported that the terminal handles nearly 30 percent of the port's container traffic. In March 2025, the Port Authority and A.P. Moller-Maersk reached an agreement on a 33-year lease extension for the terminal through 2062, which the companies said would support investments including electrification and terminal layout improvements, according to gCaptain. The announcements describe electric equipment, not remote operation or full automation, and readers should be careful not to assume more than they say.
Connected Cargo
Refrigerated Containers
Many refrigerated containers carry their own controllers that record setpoint, supply and return air temperature, alarms, and power status, and some can report to remote monitoring systems. For a terminal, the important facts are whether a box is plugged in, whether it is running correctly, and when it will be picked up. For a shipper, the data shows whether the cold chain held through the port stage. When a reefer container sits at a terminal with a power fault, the difference between a quick alert and a late discovery can be a full load of perishable goods or drugs. Temperature-controlled supply chains and IoT covers the wider chain.
Container Trackers and Seals
Battery-powered trackers attached to containers report location and, in some designs, door openings, shock, and temperature. Electronic seals add tamper evidence. In a terminal yard full of stacked steel, radio reception is difficult, so trackers often use store and forward behavior and rely on terminal systems for exact slot data. Shippers use these devices to confirm that cargo has left the terminal and to estimate arrival at the warehouse.
Chassis and Trailers
Chassis are a frequent source of delay and cost, because a container cannot leave without one, and per diem charges accrue from pickup. Trackers on chassis show where they are, how long they have been out, and which are available. Combined with gate data, this lets a drayage firm plan pickups more accurately and challenge charges that do not match the record.
Gate and Yard Identification
Optical character recognition at gates reads container numbers, chassis IDs, and license plates, and links them to appointments and release status. Inside the yard, positioning systems on equipment record where each box is placed. Together, they produce the yard inventory that every other decision depends on.
Connected Equipment
| Equipment | Key Data | What It Enables |
|---|---|---|
| Ship-to-shore cranes | Lift counts, motor and hoist condition, wind and load data | Planned maintenance and safer, steadier operations |
| Rubber-tired gantry cranes | Position, moves, power use, battery or electrical system status | Yard productivity and energy tracking |
| Terminal tractors | Location, trips, idle time, battery state of charge | Charging schedules and fleet utilization |
| Chargers and power systems | Load, availability, faults, energy cost | Peak demand control and uptime |
| Reefer plugs and racks | Power status and connected container alarms | Faster response to cold chain faults |
| Gate and scanning systems | Throughput, read rates, queue length | Shorter truck turn times |
Electrification Changes the Data Problem
A diesel tractor needs fuel and periodic service. An electric tractor needs a charging plan. Fleets of electric equipment require telemetry on battery state of charge, health, temperature, and charging cycles, and charging infrastructure needs its own monitoring for availability and faults. Operators will want to schedule charging around vessel work and electricity prices, and to avoid demand peaks that raise power costs. The same measurement habits used in large buildings and plants, described in IoT energy management for New Jersey businesses, carry over. Electrification also raises questions about charging safety, grid capacity, and workforce training. Electrek reported that APM is investing in training with regional labor partners to prepare its workforce for the new equipment.
Maintenance: Keeping the Machines Moving
Terminal equipment operates in salt air, wet weather, and heavy duty cycles. Cranes, drives, and hydraulics wear in ways that vibration, temperature, and current signals can reveal. The predictive approaches in predictive maintenance in New Jersey apply directly, though the cost of downtime is expressed in vessel delays. Electric equipment introduces new components to monitor, such as battery packs, power electronics, and cooling systems, and operators will build experience over time. Because terminal operators work with equipment vendors who also collect data, contracts should address who owns telemetry and how it can be shared.
What This Means for Shippers, Truckers, and Warehouses
- Shippers and importers: use terminal and carrier data to plan receiving, and ask for container-level event data, such as discharge, availability, and gate-out.
- Drayage carriers: use appointment and gate data to cut waiting, and keep records of arrival and release times to support detention disputes.
- Warehouses: link inbound container status to dock schedules, as in connected freight links between ports and warehouses.
- Cold chain shippers: request reefer monitoring data during the terminal stage and agree on response steps for alarms.
- Equipment and technology vendors: opportunities exist in charging, telemetry, and integration, with a need for rugged, secure devices.
Security and Resilience
Ports are critical infrastructure, and connected equipment expands the attack surface. Operational networks should be segmented from business networks, remote vendor access controlled and logged, devices inventoried and updated, and incident plans rehearsed. A terminal also needs resilience to power and network outages, since a lost connection to the gate system can stop trucks from moving. For the broader security context, see IoT news for New Jersey businesses.
A Composite Example: The Reefer That Did Not Get Plugged In
Consider an importer of perishable goods whose refrigerated container is discharged on a busy afternoon. The container is set on a stack without a power connection, and the terminal's data shows no plug assignment. The container's own controller reports rising return air temperature, and the importer's monitoring service flags it. A phone call to the terminal leads to a plug assignment within the hour, and the contents are saved. Without the container's data and a way to compare it with the terminal's plug records, the problem would have been discovered when the container was opened. This scenario is illustrative and not a report on a specific terminal or shipment.
Workforce, Safety, and Change
New equipment changes jobs. Operators who drive electric tractors, technicians who maintain chargers, and planners who watch dashboards need new skills, and training takes time. Safety also changes: high-voltage systems, charging areas, and connected equipment call for updated procedures. Terminals that involve workers and their representatives early, explain what data will be collected and why, and invest in training tend to see smoother adoption. Data about equipment and operations should be used to improve safety and efficiency, and clear rules about how individual performance data is handled help maintain trust.
Looking Ahead: What to Watch
- How quickly electric equipment enters service and what charging data becomes available.
- Whether terminals expand customer access to container event data and reefer alarms.
- How volume swings, such as the one seen in June 2026, affect yard planning and appointments.
- Developments in the federal and regional policies that shape port operations and security.
Questions to Ask Your Port and Carrier Partners
- What container events are available, how fast, and in what format?
- How are reefer alarms communicated, and to whom?
- How are appointment, gate, and release data shared?
- What are the data retention and dispute procedures for detention and chassis charges?
- How does the terminal's equipment electrification affect operating hours and capacity?
Common Mistakes
Assuming that a terminal's internal data is automatically available to customers is the first. Others include relying on a single tracker for a high-value container, ignoring reefer alarms during the terminal stage, and making plans without accounting for volume swings like those seen in 2026. A final mistake is treating the port as a black box. The best-run shippers build relationships and data agreements with terminals and carriers so that problems surface early. The regional picture is covered in IoT in New Jersey logistics.
